Medical surgical mask machine
date：2021/1/9 16:14:05 / read： / source：本站
Medical surgical mask machine
1. Product description
The mechanism part has precision machined parts and components, imported standard parts from Japan, equipped with three-point combination of air channels such as AIRTAC, SMC etc.
The electric control part adopts Xinjie series PLC, Mingwei switching power supply, Xinjie human-machine interface, etc. The whole machine has the characteristics of high precision and humanized operation.
| Power supply | Equipment 220VAC±5,50HZ,Rated Power 10kW |
| Compressed air | 0.5~0.7 MPa,flowrate 300L/min |
| Application Environment |
Temperature 10-35 ºC, humidity 5-55% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000) |
| Qualified rate of equipment production | 98% |
| Equipment failure rate | 2%( refers to the fault caused by the equipment itself) |
Only the staff with professional training and authority approval can operate the equipment. The staff is familiar with the operation instructions and can follow the instructions!
(1) Before starting the machine, make sure that only authorized personnel are near the machine.
(2) Before each start-up, check whether the cabinet, case and other components are bumped or damaged, and whether the fastening screws are loose, so as to ensure that the operation can be done only when the machine is in good working conditions. Report the equipment damage to the supervisor in time.
(3) Remove unnecessary objects and materials near the machine before starting each time.
(4) Make sure that the vehicles do not collide with each other every time before starting the machine.
(5) Make sure that all safety devices are working properly before each startup.
8). Cutting
5. Picture
100#Medical surgical mask machine
110#Medical surgical mask machine
120#Medical surgical mask machine
130#Medical surgical mask machine
140#Medical surgical mask machine
150#Medical surgical mask machine
160#Medical surgical mask machine
writer：admin